,

Wind turbine V On Grid 230V/ 600W

3.178,00 4.045,00 

The “little one” in continuous use for your household, including 230V/50Hz mains connection unit, ready to plug in!

 

The V600 EV2 Vertical Axis Wind Turbine (VAWT) is supplied as a kit, also ready to plug in. This consists of a vertical axis of rotation with mounting points, permanent magnet generator, 3 rotor blades, 6 rotor struts, 6 spacers, stainless steel screw connections and packaging, documentation for registration with the grid operator!

  • Electronics or power supply units optional (see variant 2) + 3) or under Mains connection devices

Charge controller and inverter are not included with variant 1)
Cables and batteries 24V / 48V (2 /4x12V) are not included in any of the variants listed
Batteries are not required, as the electricity can also be fed directly into the household grid.

Yield calculation (theoretical) with 100% self-consumption ./. 10% converter losses:
e.g. electricity price 40 ct/kWh) -> 2214 kWh/a x 0.40 EUR/kWh x 0.9 ≈ 797 €/year *
Annual output (kWh/a) from table on the left, determined with Rayleigh distribution (wind statistics model)

* Note:  These are theoretical calculations based on manufacturer specifications and statistical values. The real values can deviate significantly both negatively and positively due to topography / local conditions (trees, position behind the dyke, other buildings, jet effects, etc.)! The underlying  values and results  therefore  No legally binding benefit commitment  represent!

Delivery time: 1 set immediately from stock, further kits approx. 10 weeks!

SKU: DT00060 Categories: ,

Lieferzeit: immediately from stock: approx. 1 week

Manufacturer information on technology and performance

Wind turbineV600 EV2Controller 24V/48Vnot included in variant 1
Generator typeThree-phase permanent magnet (DPM)(= charge controller)Variant 2: Controller 24/48V
Rotor height2.0 mVariant 3: Controller with inverter as combined device with 230V/50Hz output
Rotor diameter1.6 mVariant 2 + 3: with MPPT
Number of rotor blades3 piecesVariant 3: with electric brake load (dump load)
Rotor blade materialHigh-quality aluminum alloy, corrosion-protected
Turbine weight54 kg (incl. generator)
Working temperature-20°C to +50°C
Design period20 years
Rated power600 W
Maximum power800 W
Cut In Wind2.5 m/s = 9 km/h600W inverternot included in variant 1
Nominal wind speed10 m/s = 36 km/h(= inverter)Variant 2: 230V NPE sine wave inverter (off-grid) can be ordered as an option
Maximum permissible wind42 m/s = 151 km/hVariant 3: Inverter 230V/50Hz NPE (grid feed)
Rotation limit360 rpm (for Var. 3 with automatic braking)
Generator efficiency96 %
Sound level< 45 dB(A)Recommended cable cross-sectionup to 25m cable length = 3 x 1.5mm²
Manufacturer’s warranty5 yearsGenerator –> Controller
certificateCE, EN 61000-3-2:2014

 

Weight54 kg
Variant equipment

1) V600 kit for self-assembly, 2) V600 kit incl. controller with 24-48V output voltage for battery connection, 3) V600 kit incl. controller with mains inverter 230V ready to plug in DT43102

Product safety

Manufacturer information

spezielle Ausführung hergestellt für Deichturbinen

Person responsible for the EU

Charles Zhou

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.