,

Wind turbine kit horizontal 1kW

1.899,00 2.718,00 

The “standard appliance” for the average household!

 

The H 1000 Horizontal Axis Wind Turbine (HAWT) is supplied as a kit. This consists of connecting flange for mast and generator, permanent magnet generator, 3 rotor blades, aerodynamic rotor ring cover, tail fin, stainless steel screw connections and packaging, documentation for registration with the grid operator!

  • Electronics or power supply units optional, see variant 2) + 3) or under Mains connection devices

Charge controller and inverter are not included with variant 1)
Cables and batteries 24V / 48V (2 /4x12V) are not included in any of the variants listed
Batteries are not required, as the electricity can also be fed directly into the household grid.

Yield calculation (theoretical) at 100% self-consumption ./. 10% converter losses:
e.g. electricity price 0.40 EUR/kWh) -> 3963 kWh/a x 40 ct/kWh x 0.9 ≈ 1727 €/year *
Annual output (kWh/a) from table on the left, determined with Rayleigh distribution (wind statistics model)

* Note:  These are theoretical calculations based on manufacturer specifications and statistical values. The real values can deviate significantly both negatively and positively due to topography / local conditions (trees, position behind the dyke, other buildings, jet effects, etc.)! The underlying  values and results  therefore  No legally binding benefit commitment  represent!

Delivery time currently approx. 8 weeks!

SKU: DT10100 Categories: ,

Delivery time: immediately from stock Manufacturer: approx. 6 weeks

Manufacturer information on technology and performance

Wind turbine H 1000 Controller 24V/48V not included in variant 1
Generator type Three-phase permanent magnet (10 poles) (= charge controller) Variant 2: Controller / inverter each in separate control box
Rotor material GRP Variant 3: together with inverter in a switch box
Rotor diameter 3.2 m Variant 2 + 3 with MPPT
Number of rotor blades 3 pieces Variant 3 with electric brake load (dump load)
Turbine weight 60 kg (incl. generator)
Working temperature -20°C to +50°C
Design period 25 years
Rated power 1000 W
Peak power 1400 Wp
Cut In Wind 3.0 m/s = 11 km/h 1kW inverter not included in variant 1
Cut out wind 25 m/s = 46 km/h (= inverter) Variant 2: pure sine wave inverter 230V NPE (off-grid)
Maximum permissible wind 45 m/s = 162 km/h Variant 3: 230V NPE inverter (grid feed)
Rotation limit 350 rpm
Generator efficiency > 96 %
Sound level < 46 dB(A) Recommended cable cross-section up to 10m cable length = 3 x 4mm²
Manufacturer’s warranty 5 years Generator –> Controller up to 15m cable length = 3 x 6mm²
certificate CE, EN 61000-3-2:2014

 

Weight 60 kg
Variant equipment

1) H1000 kit for self-assembly, 2) H1000 incl controller with 24-48V output voltage for battery connection, 3) H1000 incl. controller with mains inverter 230V plug-in DT43102

Withdraw from contract

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.