Preorder
, ,

PV Solar Tracker 2-Axis ≤3m Construction Height – 3MDualTracker

896,10 € – 3.761,00 €

2-axis PV tracker with automatic sun tracking and 0-40° angle of attack. Up to 45% more energy yield. Complete kit (without modules) incl. control system, sensors, anchor kit and foundation plan.

Costs somewhat more than a roof installation – but significantly increases your photovoltaic yield and the value of your property and makes every kilowatt hour noticeably more valuable. Also usable in areas with restricted construction height (≤3m).

You can find custom inverter and grid connection kits here:
PV Tracker Grid Connection Kits 230V
PV Tracker Grid Connection Kits, 380 V, 3-phase

You can find the optional/alternative screw foundation (instead of concrete) here:
Screw Foundation, Ground Anchor, Concrete-Free Foundation for PV Trackers

Select your desired option (number of modules) here to see the exact price.

Expected to be available from end of March 2027
Pre-order 3MDualTracker now (Preorder):
30% deposit and 15% price discount
All amounts are subject to 19% VAT, if applicable

Price available at 0% VAT pursuant to Section 12(3) of the German Value-Added Tax Act (UStG) for PV users with their primary residence in Germany (see note on page 1 of the shop)

vertical PV Solar Tracker 2-axis, construction height max. 3m –
up to 45% more energy yield

Maximum performance through automatic sun tracking on two axes. Robust, storm-proof and ideal for
single-family homes, allotments, agriculture, commercial use and off-grid projects, states with restricted construction height.

  • +25–45% more PV yield through precise east-west tracking
  • Storm-proof emergency position up to 47 m/s
  • For 2–10 standard modules (0.8–5 kW)
  • Complete kit, including foundation plan and control system
  • max. 3m construction height, for permit-free installation
  • Available immediately from the Wremen warehouse
Why a vertical 2-axis PV tracker ≤3m construction height?
With a maximum construction height of 3 meters, the 3MDualTracker may also be installed permit-free in states with restricted construction height
. The 3MDualTracker automatically aligns your PV modules to the optimal sun position.
Compared to fixed mounting systems, you generate permanently more energy.
Up to 25–45% more energy yield
Through precise tracking on two axes and a tilt angle up to 40°, both the east-west
angle of incidence and the north-south altitude of the sun throughout the day are significantly improved.
This way you get significantly more performance from your modules.

Ideal for

  • States with 3m max. construction height for freestanding PV systems
  • Single-family homes with garden
  • smaller ground-mounted systems
  • Stand-Alone Systems & Off-Grid Systems
  • Research Projects

Fully automatic & low-maintenance

The control is based on GPS and astronomical sun position calculation.
The tracker operates fully automatically and is designed for low-maintenance continuous operation.

Both slew drive and linear actuator have very high wear resistance and aging stability, are self-lubricating, maintenance-free for 25 years, operating temperature range -30°C to +80°C.

No professional maintenance staff is required; if the equipment malfunctions, replacement parts can be installed on-site in no time.

The drive options we offer—with an IP65 protection rating for electronic parts and dual-layer protection for core components (
)—can be used in desert, snow/ice, and underwater projects.

The structure consists of hot-dip galvanized steel (≥65µm galvanization) with high strength and good corrosion resistance and can be installed in coastal areas.

 

Models & Variants

Choose the right 3MTracker for your module quantity and power:

Model Modules Performance Area (approx.) Wind load Price starting at
3MDualTracker M 2 or 4 modules 0.8–2.0 kW 230 × 200 / 400 cm up to 47 m/s €2987 (Preorder: €2539)
3MDualTracker L 6 modules 2.4–3.0 kW 350 × 400 cm up to 47 m/s €3391 (Preorder: €2882)
3MDualTracker XL 8 modules 3.2–4.0 kW 460 × 400 cm up to 47 m/s €3486 (Preorder: €2963)
3MDualTracker XXL 10 modules 4.0–5.0 kW 570 x 400 cm up to 47 m/s €3,761 (Preorder: €3,197)

Note on Technical Specifications:

The kit is complete and includes all the mechanical and electronic components needed for assembly.

  • Mounting system for PV modules
  • Galvanized steel frame with mast
  • Anchoring kit, including positioning template (screw-in foundation available for an additional charge)
  • 1 slew drive and 1 linear actuator (electric)
  • Anemometer, as well as optional snow and rain sensor
  • CNC Control Unit
  • Screws, nuts, and small parts
  • Zinc spray, 8.5mm drill bit, thread locker
  • Foundation Plan
  • German Assembly and Operating Instructions (other languages available upon request)
  • Service and Support from Deichturbinen

important notes:
Solar modules, MC4 cables and inverter are not included in delivery
Extensions for vertical posts are supplied when ordering through the shop exclusively together with a 3MTracker
(if 3m construction height is negligible)

Safety & Storm Performance

  • Automatic emergency position in storm (rotates into wind direction)
  • Turned out of wind from approx. 27 m/s (adjustable)
  • Designed for strong wind areas up to 47 m/s (in emergency position)
  • Sturdy, galvanized steel construction for long-lasting use

Technical data

Drive & Control

  • 2-axis drives with approx. 2400 Nm torque each
  • maximum noise level approx. 50dB(A) only briefly
  • GPS-Based and Astronomical Determination of the Sun’s Position
  • Powered by a 230 V AC outlet
  • No separate backup battery required
  • Quiet, fully automatic operation

Mechanics & Dimensions

  • See the images above for external dimensions!
  • Mast height: 1.0 m
  • with 1.13 x 1.99m modules maximum height ≤ 3m (with ground-level foundation)
  • Optional mast extensions: 0.6 m / 1.5 m (if 3m negligible) –> see POWERTracker
  • All common module sizes installable (if 3m negligible)
  • Maximum module area: 21 m²

Wind & Weather

  • Automatic Emergency Position During a Storm
  • Sensors for wind, optional for snow and rain
  • Designed for use in harsh coastal and inland environments

Installation & Requirements

  • construct a suitable foundation (e.g., according to the drawing provided)
  • A 230 V connection is required for the control system
  • The tracker can be assembled in about 4–8 hours by two people
  • Optional: Integration with remote monitoring systems

Delivery Time & Shipping

  • expected from April 2027
  • Shipping via a freight forwarder or pickup by arrangement

Customer Testimonials

“My initial feedback: Great product! Everything has turned out a bit bigger and more substantial than I had originally imagined. … But now that it’s almost finished, I’m glad I chose your product over cheaper alternatives, because it’s massive, sturdy, and makes a very solid impression.”
— Roland Kaunzner, Hungary

“With the XL-POWERTracker we achieved over 50% more yield in annual comparison. Installation was easier
than expected.”
— Heinrich, R. Farmer from NRW

“Robust, reliable, and perfect for our off-grid test facility.”
— Research project, University of H…

Frequently Asked Questions (FAQ)

Q: How much more electricity does the PV tracker generate compared to a fixed system?

A: Depending on location and season, the additional yield compared to an optimally south-facing fixed installation is approx. 25% to 45%. Especially in the morning and evening hours, the additional performance is enormous.

Q: What happens during a storm or extreme weather?

A: The system is equipped with an automatic wind sensor. If the wind speed exceeds a defined threshold, the control system immediately moves the tracker into a flat, horizontal position to minimize its wind resistance.

Q: Do I need a building permit to install it?

A: In many states and regions, small ground-mounted systems up to a certain construction height are permit-free. We nevertheless recommend a brief consultation with the responsible local building authority.
further information can also be found here: Small Wind Power and PV Building Law 2026: permit-free heights

Weight 280 kg
Dimensions 250 × 200 × 200 cm
Variant

PREORDER: 3MDualTrackerM galvanized steel for max. 4 modules with 1134mm width, PREORDER: 3MDualTrackerL galvanized steel for max. 6 modules with 1134mm width, PREORDER: 3MDualTrackerXL galvanized steel for max. 8 modules with 1134mm width, PREORDER: 3MDualTrackerXXL galvanized steel for max. 10 modules with 1134mm width, 3MDualTrackerM galvanized steel for max. 4 modules with 1134mm width, 3MDualTrackerL galvanized steel for max. 6 modules with 1134mm width, 3MDualTrackerXL galvanized steel for max. 8 modules with 1134mm width, 3MDualTrackerXXL galvanized steel for max. 10 modules with 1134mm width

VAT Determination

VAT 19% VAT, 0% §12 Abs.3 UstG for authorized customers

Product safety

Manufacturer information

Wremen, Rielker Weg 11, 27639 Wurster Nordseeküste

Person responsible for the EU

Thomas Bauer, Dipl.- Ing.

You may also like…

Withdraw from contract

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.